NSD NCV-20NBNVP - Position Data Increase Direction

8-2. Position Data "Increase Direction" Setting
The position data increases or decreases according to the ABSOCODER sensor's rotative direction (travel
direction). The direction in which the position data increases is specified by a switch on the converter's rear
face.
Switch setting
Switch setting
Increase
direction
Alteration of the position data
Switch DOWN position
("CW" side)
CW
Switch UP position
("CCW" side)
CCW
Rotative direction of the shaft
VRE
Important Position data "increase direction" setting caution
Do not change the position data "increase direction" switch setting while the power is ON, as this
could cause an accident.
22