4
1.0 TO SET CLOCK
Press HOUR and MIN to advance to the present hour and
mins. Check AM/PM, and press ENTER.
2.0 TO SET DATE
If you are setting for the first time, display will show:
Press the MONTH, DATE, and YEAR keys to advance to the
desired month, date and year, then press ENTER. NOTE:
The day of the week will be automatically set once the date
is set.
3.0 DAYLIGHT SAVING TIME
After setting or modifying the date, the display will show:
a. For standard USA daylight saving (DST), press MODE
and go to step 4.0.
b. For dates other than standard USA dates, press MONTH
and go to section 10.0.
c. If daylight saving time (DST) is NOT required, press DEL
and the display will show:
Press ENTER then go to step 4.0.
SIG1 SIG2 CLK DATE
SCH
ON
OFF
To Next Page
Loading...
Need help?
General
