6
5.2 SETTING DAYS AND HOLIDAY
Press SELCT to select the flashing desired days and/or holi-
day, otherwise press DAY to skip and then press ENTER. To
delete an entry, press DAY until the previously selected entry
flashes, press SELCT and then press ENTER. The display will
show:
Follow the same procedures above to set more schedule
entries for Channel 1. At the next blank screen press SELCT
to select the desired channel and proceed with the steps
above to set more schedule entries.
6.0 TO SET ASTRONOMIC SCHEDULE
Press the MODE key until display shows:
Press SELCT to select desired Channel 1 or 2. Press the LAT
key to advance to the desired degree of latitude, from 10º
to 60º north or 10º to 60º south. Press ENTER.
6.1 SELECTING ASTRO DAYS
Display will show:
Press SELCT to show time. Press SELCT again to select the
flashing desired days and/or holiday in which you want
the indicated channel to turn ON at sunset, otherwise press
DAY to skip and then press ENTER. To delete an entry, press
DAY until the previously selected entry flashes, press SELCT
and then press ENTER.
NOTE: Sunset Time will be based on Date and Latitude
entered.
To Next Page
Loading...
Need help?
General
