8
6.2 ASTRONOMIC ON AND TIME OFF
Set astronomic ON per sections 6.0 and 6.1.
TIME OFF:
Press MODE until “sch01” appears. Press ENTER until a
blank schedule appears then press SELCT to select channel
1 or 2. Press HOUR and MIN to set desired OFF time. Press
SELCT to select desired days, holiday and/or seasons and
then press ENTER.
6.3 TIME ON AND ASTRONOMIC OFF
Press MODE until “sch01” appears. Press ENTER until a
blank schedule appears then press SELCT to select channel
1 or 2. Press HOUR, MIN and EVENT to set desired ON
time. Press SELCT to select desired days, holiday and/or
seasons and then press ENTER.
ASTRO OFF:
Set astronomic OFF per sections 6.0 and 6.1.
7.0 REVIEW, MODIFY AND DELETE SCHEDULES
Press MODE to advance to any of the following MODES:
1. CLOCK MODE: Press HOUR and MIN to modify existing
settings. Press ENTER.
2. DATE MODE: Press MONTH, DATE and YEAR to modify
existing settings. Press ENTER. DAY is automatically
adjusted.
3. DST Daylight Saving Time: To review press ENTER. To
modify press MONTH, DATE and DAY to change existing
settings. Press ENTER.
4. HOLIDAY MODE: Press ENTER to advance to desired
holiday. Press MONTH and DATE to modify, and DEL to
delete. Press ENTER.
5. SCHEDULE MODE: Press ENTER to advance to desired
schedule. Press HOUR, MIN, EVENT to modify schedule,
and DEL to delete. Press ENTER after each modification.
6. ASTRO MODE: Press SELCT to select the desired channel.
Press LAT to change latitude. Press ENTER. Press DAY and
SELCT to add or delete days in the sunset mode. Press
ENTER. Press HOUR and/or MIN to change offset time for
sunset. Press EVENT to change offset from + to --. Press
ENTER and follow the same procedure above to modify
or review sunrise settings.
7. RUN MODE: Time, day and seconds are displayed. If
today is a programmed holiday, an H (Holiday) will be
displayed steady.
To Next Page
Loading...
Need help?
General
