To Next Page

To Previous Page

The display will show:

If an offset to sunset time is required, press HOUR and MIN.

Offset can be set to 4 hours max. Press EVENT to select + or

-- and then press ENTER.

NOTE: A + sign will turn the load ON that many hours

and/or minutes after sunset. A -- sign will turn the load ON

that many hours and/or minutes before sunset. The display

will show:

Press SELCT and then ENTER to activate sunrise time.

NOTE: To turn load OFF at a preset OFF time, leave this

ﬁeld blank. Press ENTER. The display will show:

If an offset to sunrise time is required, press HOUR and

MIN. Offset can be set to 4 hours max. Press EVENT to

select + or -- and then press ENTER.

NOTE: A + sign will turn the load OFF that many hours

and/or minutes after sunrise. A -- sign will turn the load OFF

that many hours and/or minutes before sunrise.

Questions and Answers:

Need help?

Do you have a question about the NSI TORK DWZ200B and is the answer not in the manual?

NSI TORK DWZ200B Specifications

General