Setup
1. Use the Device Discovery Tool (https://www.networktechinc.com/download/d-environment-monitor-micro.html) to locate the
ENVIROMUX on the network. Update the IP address, Mask, and Gateway as needed to connect to the local network. Click
on Submit to update the ENVIROMUX.
Note: By default, the E-MICRO has been assigned a static IP address of 192.168.1.24, so you may be able to proceed to
step 2, entering this number. If you want to immediately change the IP address, mask and gateway settings, use the
Device Discovery Tool as described above (and on page 12 of the manual).
Note: The computer using the Device Discovery Tool and the ENVIROMUX must be connected to the same subnet
in
order for the Device Discovery Tool to work.
Note: The Device Discovery Tool requires the Java Runtime Environment to operate. A link to the web
page from which
it can be downloaded and installed is provided on the website.
2. Type the updated IP address into the browser address bar.
3. Log in to the web interface as the administrator
- username = root password= nti (letters are case sensitive)
4. Configure Network and SMTP server settings (Administration->Network ).
5. Set the date and time.
6. Configure SNMP settings.
7. Add users (Administration->Users->Add New User) and specify email address, contact methods, etc. as needed.
8. Temperature and Humidity sensors will be automatically detected. External contact sensors and sensors connected to
“DIGITAL IN” must be added manually through the web interface before configuring them.
9. Confi
gure se
ns
ors and alerts as desired for thresholds, alert notification methods, etc.
Some Available Sensors (Sold separately) :
Model Description
E-T-E7 Temperature Sensor
E-TRHM-E7 Temperature/Humidity Sensor
E-LDx-y Liquid Detection Sensor-Digital
E-SDS-PA Smoke Detection Sensor
E-CMD-P Carbon Monoxide Detector
E-M-DCS Door Contact Sensor
E-IMD-P Infrared Motion Sensor
E-GBS-P Glass Break Sensor
E-EBS Emergency/Panic Button
E-ACVDRLY-515/C14 AC Voltage Detector
E-TDS Tamper Switch
For a complete list of compatible
sensors, go to
http://www.networktechinc.com/enviro
nment-monitor-micro.html
For more details, specifications, and troubleshooting tips, see the Installation and Operation Manual or go to
www.networktechinc.com
.
MAN231 Rev. 10/28/21
To Previous Page
Loading...
Need help?
General
