NTI ENVIROMUX Series Wiring Instruction

1
Wiring Instruction For:
E-RKS REMOTE STATION KEYPAD
E-ACK(-V2)(P) SERIES DIGITAL KEYPAD
E-EDR-SF FAIL SAFE STRIKE
E-EDR-SCR-P FAIL SECURE STRIKE
The ENVIROMUX devices listed above are intended for connection to an NTI E-16D/5D/2D or an E-MINI-LXO (SYSTEM). For
additional instruction on their proper use and operation, see any manuals that came with them and the manual provided with your
SYSTEM.
Wiring instruction for connection to these SYSTEMs can be found below and on the pages that follow.
For the purposes of these illustrations, the “Keypad” can be either the E-RKS or E-ACK(-V2).
Wiring Connections for E-16D
E
NVIROMUX
®
Series

NTI ENVIROMUX Series Specifications

General

Product Type	Environmental Monitoring System
Temperature Range	-40°C to 85°C
Power Supply	12V DC or 24V AC
Network Interface	Ethernet 10/100 Mbps
Alarm Notifications	Email, SNMP
Sensor Types Supported	Temperature, Humidity, Water, Airflow
Power	12V DC or 24V AC
Operating Temperature	-40°C to 85°C
Mounting	Wall or Rack Mount
Communication Interfaces	Ethernet
Data Logging	Yes
Compliance	CE, RoHS