NM-200
Product Components
Names and Functions of Product
Descriptions for Controller Buttons
How to Use Product
How to Take Emergency Actions during Use
How to Store and Clean after Use
Self-check Items
Before any A/S request
Controller Check Indicator Window
Product Specifications
Product Warranty
8
9
10
14
17
20
21
22
23
24
25
Product Introduction
How to Use Product
Product Storage and Care
Contents Cautions for Safety
Cautions for Safety
Cautions for your safety
Disclaimer
· These cautions include descriptions for the safety of users and prevention
of any damage to properties among others.
· Read through the following details to use the product appropriately.
· This Manual classifies the risk level into following three degrees and the
following graphical symbols remind users of cautions for matters and
operations of concerns about any risk.
· The manufacturer, importer and/or agent shall not be responsible for any
problem and/or other damage to the product which has been caused
from the user’s fault or operation.
· Information in the user manual has been prepared on the basis of the current
product specifications.
· Details in the user manual might be different from those on the product.
· The product manufacturer will be adding and supplementing new functions
at any time and new technologies shall be applied to the product continuously
in the future as well.
· All the standards and functions are subject to change without any notice
to users to improve performance.
Interpretations on symbols
Caution
If there is a possibility of a minor injury or damage to goods due to
non-compliance.
Danger
If there is high possibility of death due to non-compliance.
Warning
If there is a possibility of an injury or death due to non-compliance.
To Next Page
Loading...
