Caution
There might be risk of injuries or fire if you fail to check out the
followings. Make sure that you check out the following.
1. Is the power cord connected to an outlet?
2. Are the power LED lamp and temperature display
lamp turned on when the power is turned on?
3. Is the temperature increasing well in the product?
4. Is the temperature in the product not too high?
5. Did you check out conditions for any damage to
the power cord or cable conditions?
1. Is the power supply automatically turned off
after 8 hours?
2. Is the power lamp on the controller off?
3. Is the temperature display screen turned off?
4. Did you remove the power cord from the
controller?
5. Is the place to keep the product exposed to the
humidity dust and/or chemicals?
Check after use
Check before use
T9
Product Storage and Care
How to Store and Clean after Use Self-check Items
'XULQJRSHUDWLRQWHPSHUDWXUH~35KXPLGLW\a
7UDQVSRUWDQGVWRUDJHFRQGLWLRQVWHPSHUDWXUHa),
KXPLGLW\aDWPRVSKHULFSUHVVXUHaK3D
Introduction
1. Separate the power cord while the product is not in use for a long time.
2. Be aware of the following for the storage place.
ྙ Keep the product in a place with no water.
ྚ Keep the product in a place with no concern of any adverse effect such
as the air pressure, temperature, humidity, ventilation, sunlight and/or
air containing dust, salt, sulfur, etc.
ྛ Be careful of safety conditions such as the slope, vibration, shock, etc.
LQFOXGLQJWKRVHGXULQJWUDQVSRUWDWLRQ
ྜ Do not keep the product in a place near any chemical or gas.
ྜྷ Avoid any direct sunlight during the storage.
3. Store the product after cleaning the components.
Caution
Ensure unplugging of the power plug before cleaning.
Otherwise, it might cause electric shocks.
How to clean
Environmental conditions
i
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Yes No
Product top
Wipe it out softly with
a piece of dry cloth.
To Next Page
Loading...
