MEGAWATT CARBON BIKE MANUAL | 1 6
A COUPLE OF POINTS TO NOTE
It can take a couple of rides for the sealant to get fully around the tyre settle. Don’t be alarmed if you need to top up the air
pressure a couple of times between rides. The tyre shouldn’t lose pressure during your ride.
Some tyres will seep sealant from the sidewalls. This should settle after the tyre has been used and generally happens on
cheaper sealants so we do recommend using a good quality sealant.
If you have an air leak at the rim, it will generally appear to happen at the valve but is most likely to be an issue with the
tape. If the air is escaping at the valve then its getting past the tape somewhere and you will need to check your tape is
not damaged.
To Next Page
Loading...
