MEGAWATT CARBON BIKE MANUAL | 2 3
HOW TO PUT YOUR MEGAWATT CARBON 720WT BATTERY ON CHARGE
With the battery removed from the bike, plug your
Powertrain Charger into the power socket.
Now plug the Powertrain Charger into the battery and
turn on your sockets power.
You will know the battery is charging when the LED is
solid red on the charger, the LED will turn green when
fully charged. The battery charge status is displayed on
the battery LEDS.
BATTERY CHARGE STATUS
During charging you can check the % status of the battery. Press and release the power button on the Bridge Display. At
100% charge the battery will automatically power off. Remove the charger from the charge port and you can now power
on your Megawatt Carbon.
PLEASE NOTE
Your Megawatt Carbon will not power on when the charger is attached and battery in 100% charged. The charger must be
unplugged from the charging port before bike powering on.
To Next Page
Loading...
