MEGAWATT CARBON BIKE MANUAL | 3 2
COAST SHIFTING
Powertrain will Auto Shift gears when you are not pedalling, this is to ensure the bike is in the correct gear relative to the
speed of the bike. This is beneficial when riding through rough terrain and pedalling to change gears poses a risk of pedal
strikes. When Auto Shift is switched off, a manual shift will spin the Power Unit and change the gear without pedalling.
AUTO SHIFT TURNED OFF / MANUAL SHIFTING
If you do not wish to use Auto Shift and change gears yourself, Powertrain can be changed to manual gear operation.
PLEASE NOTE
Manual shifts can be made any time with Auto Shift on.
• To move to a smaller cassette sprocket, press the top button on the right Pod Controller.
• To move to a larger cassette sprocket, press the bottom button on the right Pod Controller.
PUSH MODE
This is helpful for when you are off the bike and need to push your bike, the motor will activate to help you push the bike
with no pedal input.
To activate Push Mode, Press and Hold the upper button of the Left Pod Controller. Holding the button in while pushing
will give you motor assistance. After 5 minutes of inactivity or when the button is releases, Push Mode will deactivate.
Assistance will only activate when motion is detected.
To Next Page
Loading...
