MEGAWATT CARBON BIKE MANUAL | 6 4
LOW POWER MODE
When your battery reaches 3% charge, the bike will
automatically enter Low Power Mode. This will reduce the
assistance from the drive unit. This is a standard operation of
the Powertrain system to support your ride until the battery
reaches Saver Mode. Powertrain will reserve a small amount
of power to ensure Eagle Transmission Rear derailleur can
still operate. The Low Power Model display will auto dismiss
after 10 seconds, and Bridge Display will revert to the home
screen.
If the battery detects high or low temperatures, the
Powertrain will enter Low Power Mode Temperature mode.
Powertrain will reduce power to the drive unit until the
battery reaches a safe operating temperature range of
0°C (32°F) to 60°C (140°F). This is standard operation
of the Powertrain system and Powertrain will reserve a
small amount of power to ensure Eagle Transmission Rear
derailleur can still operate.
ERROR MESSAGES
The Powertrain Bridge Display on the Megawatt Carbon top tube will also display error messages. Follow the instructions on
the Bridge Display or connect your SRAM AXS app to view errors and follow the AXS app instructions to remedy the fault. If
the displayed fault persists, please contact your Nukeproof Dealer for further assistance.
To Next Page
Loading...
