Nukeproof MEGAWATT - Section 7: Specification;Sizing;Geometry;Features;Storage; Frame Specification; Recommended Sizing

MEGAWATT CARBON BIKE MANUAL | 4 8
SECTION 7 - SPECIFICATION/SIZING/GEOMETRY/FEATURES/STORAGE
FRAME SPECIFICATION
The following are available after market frame spares for the Megawatt, if any part you need is not listed, please consult
with an authorised Nukeproof Dealer.
Material Ultra Strong T700/800 Carbon Fibre Monocoque Construction
Fork Travel 170mm
Axle to Crown 582mm
Fork Offset 44mm
Rear Travel 170mm
Wheels Size Front: 29" Rear: 27.5"
Max Tyre Size 2.6"
Recommended Shock Sag (Measured seated) 30%
Shock Size 230x65mm
Shock Hardware F 25x8mm
Shock Hardware R 30x8mm / Bearing End
Sizing S/M/L/XL/XXL
Headtube 56-66mm Tapered Semi-Integrated
Headset ZS56-28.6 / ZS66/46 (1.8"" Tapered)
Bearings Required 4x 6802 LLU MAX, 5x 6902 LLU MAX, 2x F6901 LLU MAX
Seatpost 31.6mm (Internal Routing for Dropper Seatpost)
Seat Clamp 36.4mm
Motor System SRAM Eagle Powertrain Drive Unit
Battery SRAM Eagle Powertrain Battery 720wH
Rear Hub Boost 148x12mm
Rear Axle Sram UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm)
Brake Mount 200mm Direct Post
Chainring Size 36T
Protection 3D Contoured Rubber Frame Protection for DT/SS/CS
RECOMMENDED SIZING
S
M
L
XL
XXL
160cm/5’3” - 167cm/5’6”
167.5cm/5’6” - 178cm/5’10”
178cm/5’10” - 183cm/6’
183cm/6’ - 193cm/6’4”
193cm/6’4” - 198cm/6’6”