MEGAWATT CARBON BIKE MANUAL | 3 6
SECTION 5 – SUSPENSION IN MORE DETAIL
To get the most out of your Megawatt Carbon you will need to set-up and maintain your suspension. Suspension maintenance
is specialist work that we recommend only be performed by official service centres. Suspension service intervals are
detailed in the manufacture’s user guides.
Before your first ride, the suspension will need adjusted. The recommended sag for the Megawatt Carbon is 30%, seated
with riding kit on. You will need a shock pump to set your sag as shown in Quick-Start Guide. The rebound and compression
settings are subject to terrain, riding style and rider preference. Adjust the settings as you ride to find what works best for
you. Remember when setting your rear shock, the lock-out is in the off position.
Before setting up your suspension, please read the full manual for your shock and fork. SRAM has comprehensive guides for
set-up and service on their webpages. Identify the serial number on the fork and rear shock, enter the serial number into
the SRAM service website to find the required guides.
SRAM Service Guides
Rockshox Suspension Set-Up Guide
Vivid Air Shock Serial Number Position ZEB Fork Serial Number Position
To Next Page
Loading...
