PIE1027 – indice B – juillet 2018 20/56
6. Mounting and positioning
After you’ve set up the camera’s parameters to your personal preferences at home or in your
truck, you’re ready to take it outside and slide the power switch to ON.
When setting up the camera for scouting game or other outdoor applications, you must be sure
to mount it in place correctly and securely. We recommend mounting the camera on a sturdy tree
with a diameter of about 6 inches (15 cm).
To get the optimal picture quality, the tree should be about 16-17 feet (5 meters) away from
the place to be monitored, with the camera placed at a height of 5-6.5 feet (1.5-2 m).
Also, keep in mind that you will get the best results at night when the subject is within the ideal
flash range, no farther than 45 feet (14 m) and no closer than 10 feet (3 m) from the camera.
You can avoid potential false triggers due to temperature and motion disturbances in front of the
camera by not aiming it at a heat source or nearby tree branches or brush (especially on windy
days).
7. Downloading the photos/videos
To download your photos/videos to a computer, first make sure the camera power switch is in the
OFF position. Connect the supplied cable to the camera’s USB port, then directly to a main USB
port on your computer. Slide the power switch to TEST.
8. Technical specifications
To Next Page
Loading...
