Use of Peripherals
en-938821/2 C - 25
C
C.2.3 NUM Diskette Drive
A serial link cable is included in the supply of the NUM diskette drive. A customised cable can also be used (See C.1).
Connect the NUM diskette drive to a serial line of the CNC and a power supply
(See C.1.1).
Set the serial line parameters for the diskette drive (See 8.3):
Item Recommended value Other possible values
Line number Select the line number
Standard RS422
Input speed 19200 9600
Output speed 19200 9600
Number of start bits 1
Number of data bits 8
Number of stop bits 1
Parity None
Protocol Kermit
Flow control None
Logical name Give a name to the line (e.g. Disk)
Confirm the Kermit link.
C.2.4 Printer
!
CAUTION
On the printer, select the EPSON emulation.
Use a serial link connecting cable in accordance with the instructions of sections C.1.3 and C.1.4, and with the printer
documentation.
C.2.4.1 Printers Recommended by NUM
Type of printer Remarks
EPSON LX80
EPSON RX80
EPSON EX800
BROTHER M1818 Colour printer (80 columns)
BROTHER M1819 Colour printer (132 columns with CK100 Kit)
BROTHER M2518 Colour printer with serial link interface option
BROTHER HL-8E
To Next Page
Loading...
