CDN-22
BEAT MATCHING USING PITCH BEND
BPM’s (Beats Per Minute) are the same, however, the drum beats are not matched
A description of the procedure for matching the beat of PLAYER 1 and PLAYER 2 using the PITCH BEND button.
This description is for the case of matching the beat of PLAYER 2 to the beat of the music being played on PLAYER 1.
(This procedure can be done on either PLAYER).
After Matching the BPM’s adjust the pitch
temporarily as follows:
When PLAYER 2 is ahead press the --
or rotate the jog wheel counter clockwise
or
When PLAYER 2 is behind press the +
or rotate the jog wheel clockwise
or
The pitch changes automatically while the + or -- button is being pressed or the jog wheel is rotated. The faster
you rotate the wheel the more you change. Releasing the button or wheel results in a return to the original pitch. (So the
BPM’s are once again the same.)
Numark - The Proven Leader in DJ Technology
©1998 Numark Industries 12 http://www.numark.com
To Next Page
Loading...
