Need help?Do you have a question about the Numark NDX 200 and is the answer not in the manual?
General| Type | CD Player |
|---|---|
| Playback Formats | CD, CD-R, CD-RW, MP3 |
| Frequency Response | 20 Hz - 20 kHz |
| THD | < 0.01% |
| S/N Ratio | > 90 dB |
| Display | LCD |
| Outputs | RCA |
| Controls | Play, Pause, Cue, Search, Pitch |
| Power Supply | 100-240V, 50/60 Hz |
| Pitch Control | ±8%, ±16% |
Provides English instructions for quick setup and initial use of the NDX 200.
Performs searching, pitch bending, and cue point adjustment.
Allows creation of custom track sequences for playback.
Sets start and end points for creating playback loops.
Adjusts the selectable pitch adjustment range (±4%, 8%, 16%).
Switch to set the correct voltage for the operating location.
Port for connecting the supplied power cord.
Turns the unit on and off, with recommended shutdown procedure.
Line-level outputs for connecting the CD player to a mixer or amplifier.
Enables fader start functionality with compatible mixers.
To Next Page
