29
THE CRATE
The crate is an innovative tool for the digital DJ based upon one of the oldest tricks of the trade...
For decades the vinyl DJ has used his record crate as a scratchpad for organizing a set. Records to be
played - or to be considered for play - are pulled out, turned and propped above the rest. When no longer
needed, the record is dropped back out of sight. Between mixes the DJ can spend time flicking through the
collection to find more records to pull out, or to locate requests.
The crate feature of the iDJ² can be viewed much like a conventional
record crate. In other words, the crate contains the tracks that you would
like to play in your session. You do not necessarily need to have tracks
loaded in your crate - you can always directly load them to either deck -
however, the crate offers a good way to keep all the music that you
would like to use in your session organized and easily accessible.
You might have many thousands of tracks using several different
devices as your music sources. Having to browse each library every
time you want to select the next track can be time-consuming and
confusing. Instead, you can send the tracks to your crate and then easily
access them while you perform.
The crate also helps to prevent situations where you might reach for a
track that you have already played. When a track is replaced on deck it
is thrown out unless you specifically choose to pull it back into the crate.
WORKING WITH THE CRATE
In “The Library” we considered several different methods to load tracks into the crate, whether by
searching, browsing, from playlists or directly from folders on disk. Now we will discover how to work with
that crate.
Press the Crate button to open the crate work area.
The crate comprises a list of tracks and a menu as follows:
¸
to A Send the track to deck A
¸ to B Send the track to deck B
¸ swap A Swaps highlighted track with track on deck A
¸ swap B Swaps highlighted track with track on deck B
¸ pull A Pull the track on deck A back into the crate
¸ pull B Pull the track on deck B back into the crate
¸ Shuffle Shuffles the tracks in the crate
¸ Info Get detailed info about the track
¸ Remove Remove the track from the crate
¸ Clear Remove all tracks from the crate
A track can be sent to, swapped or pulled from an inactive deck only. If a track is playing on the deck you
must first pause it before sending, swapping or pulling. An example of swapping a track is shown below.
Pause Deck B and select “swap B” Music loaded on Deck B is swapped with selected track.
To Next Page
Loading...
Need help?
General
