22
Display
• Track Title: This setting determines whether track titles are shown as the track's Filename or its embedded
Metadata (tags).
• Time Format: This setting determines whether or not pitch adjustment affects how the track time is displayed.
When set to Static, the track’s time corresponds to locations in the track as usual; adjusting the pitch does not
affect it. When set to Dynamic, the track’s time will automatically adjust to account for changes in pitch. For
instance, if you set the pitch fader to -8%, the track time will increase so it is 8% longer.
• Track End Warning: This setting determines how long before the end of a track Mixstream Pro will warn you
that it is nearing the end by flashing the track overview on the touchscreen.
Safety
• Lock Playing Deck: This setting determines whether or not you will be able to load a track to the deck as it is
playing. Select On or Off. When this setting is on, the deck must be paused in order to load a track to it.
• Needle Lock: This setting determines whether or not you can tap the track overview on the touchscreen to jump
to that location in the track during playback. Select On or Off. You can use the track overview while playback is
stopped regardless of this setting.
• Pad Lock: This setting determines whether the pads and pad mode buttons are always enabled (Off) or disabled
(On). When disabled, the pads and pad mode buttons will not be lit.
Library
• Key Notation: This setting determines how the track key is notated on the touchscreen. You can view the key as
all Sharps, all Flats, Open Key or Camelot.
• Key Filter: This setting determines whether the Key filter shows tracks with the same key only (Match) or tracks
with compatible keys (Compatible).
• BPM Range: This setting determines the lowest- and highest-possible BPM values that will be used when tracks
are analyzed: 58
–115, 68–135, 78–155, 88–175 or 98–195 BPM.
• BPM Filter Tolerance: This setting determines the “tolerance” of the BPM filter so you can include tracks with
tempos that are within a small range of the selected tempo. Select ±0, 1, 2, 3, 5, 10, or 15.
• Collection Browse Behavior: This setting determines browsing behavior when using the Library. When set to
Select, tapping a playlist or folder will select it, and a double-tap is required to open it. When set to Open, tapping
a playlist or folder will open it.
• Demo Content: Use this option to enable or disable the pre-installed demo content.
Deck Colors
To change the deck color, tap the color box under the name of the deck, and then tap the color to select.
To Next Page
Loading...
Need help?
General
