6
Features
Top Panel
2
1
4
5
6
7
3
10 10
8
1. Touchscreen: This full-color, multi-touch display shows information relevant to Mixstream Pro's current
operation. Touch the touchscreen (and use the hardware controls) to control the Mixstream Pro interface.
2. Browse Knob: Turn this knob to navigate through lists. Press the knob to move forward in the touchscreen or
select a song to load on either deck.
Press and hold Shift and press this knob to load the selected track to the Prepare list.
3. Load 1: Press this button to load the selected track to Deck 1.
Quickly double-press this button to instant double the track currently playing on Deck 2 to Deck 1.
4. Load 2: Press this button to load the selected track to Deck 2.
Quickly double-press this button to instant double the track currently playing on Deck 1 to Deck 2.
5. Back: Press this button to move back in the touchscreen.
6. View: Press this button to cycle between the Library and Performance views.
Hold Shift and press the View button to switch between simple view or horizontal and vertical waveform views in
Performance Mode.
7. Source / Lighting: Press this button to open the Source menu.
Press and hold Shift and press this button to open the Engine Lighting menu.
8. Control Center: Press this button to open the Control Center menu, where you can quickly adjust commonly
used settings and navigate to the User Profile, Settings, Source, Wi-Fi, Record, and Engine Lighting menus.
9. Shift: Press and hold this button to access secondary functions of other controls.
10. Channel Level:
Turn this knob to adjust the level of the pre-fader, pre-EQ audio signal for the channel.
11. Channel EQ: Turn these knobs to boost or cut the high, mid-range, and low frequencies for the channel.
12. Filter: Turn this knob to apply a filter to the channel. Starting from the center (12:00) position, turn it counter-
clockwise to apply a low-pass filter, or turn it clockwise to apply a high-pass filter.
To Next Page
Loading...
Need help?
General
