DISASSEMBLY PROCEDURES
1.REMOVAL OF TOP COVER (Fig1)
(A.) TAKE OUT THE 6 PCS SCREWS FROM THE TOP COVER.
Fig.1
2.
REMOVAL OF FUNCTION PCB ASS'Y AND DISPLAY MODULE AND POWER SWITCH PCB ASS'Y. (Fig2)
(A.) REMOVAL
OF 5 PCS SCREWS AND FRONT PANEL AND POWER KNOB AND VR KNOB FROM THE PANEL
PLATE.
(B.) REMOVAL OF 11 PCS SCREWS AND 3 PCS CONNECTORS BEFORE FUNCTION PCB ASS'Y AND
DISPLAY
MODULE.
(C.) REMOVAL OF 4 PCS SCREWS AND 1 PCS CONNECTORS BEFORE POWER LED PCB ASS'Y.
Fig.2
To Next Page
Loading...
