temporary and the track will resume to the position it would have been if those
functions never used.
21. SEARCH. Hold this button to set the Jogwheel to temporary set the Jogwheel to
Search/Seek mode. While the button is held, use the Jogwheel to fast search/seek
through the track. Once released, the Jogwheel will return to its previous mode.
22. JOG. Touch sensitive jogwheel. Use the jogwheel to scratch and pitch bend (if Vinyl
mode is selected), or pitch bend (in CD mode) If the SEARCH button is pressed, use
the Jogwheel to fast search/seek through the track.
The Jogwheel also offers Loop In and Loop Out adjustment (see LOOP IN and
LOOP Out buttons)
23. MASTER TEMPO. Press this button to "lock" the track's pitch to its original key. The
track's tempo will remain at the speed designated by the Pitch Fader.
24. PITCH RANGE. Press this button to select the next available range for the Pitch
Fader (available values ±4%, ±8%, ±16% and ±100%).
The Leds above this button will indicate the selected pitch range.
A different Pitch range can be selected from the Deck Options in VirtualDJ GUI.
25. PITCH. Adjust the track's playback speed (tempo).
The actual pitch fader will not alter the pitch of the track if the actual pitch and the
software pitch value do not match (software soft-takeover, ghost fader visible on the
GUI). In most cases this may happen if SYNC is prior pressed or switching decks
and the other deck is having a different pitch software value.
26. PITCH BEND. Press and hold down these buttons to temporary speed up/slow
down the song while pressed. When released, the track playback will return to the
speed designated by the Pitch Fader.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
