Need help?Do you have a question about the Numark TT200 and is the answer not in the manual?
General| Drive Type | Direct Drive |
|---|---|
| Platter | Aluminum die-cast |
| Start/Stop Button | Yes |
| Reverse Button | Yes |
| S/N Ratio | >50dB |
| Braking System | Electronic brake |
| Platter Diameter | 330 mm |
| Cartridge | Not included |
| Outputs | RCA |
| Speeds | 33 1/3, 45 RPM |
| Pitch Control | +/- 10% |
| Tonearm | S-shaped |
| Start-up Time | <0.7 sec |
| Dimensions | 450 x 352 x 144 mm |
| Motor | High-torque direct drive motor |
Describes traditional setup for long mixes and blending techniques.
Describes battle style setup for scratching and aggressive mixing.
Step-by-step instructions for installing the turntable platter correctly.
Instructions for mounting a cartridge onto a separate headshell.
Instructions for installing integrated headshell cartridges.
Explains S-Shaped vs. Straight tonearm tubes and their uses.
Step-by-step guide to swap tonearm tubes safely.
Guides on balancing the tonearm for proper stylus pressure.
How to set the anti-skate to prevent skipping and stylus damage.
Identifies and describes main operational buttons and features on the turntable.
Identifies and explains various parts of the tonearm assembly.
Describes the adjustable feet, handles, and rear panel connections.
Steps for connecting power and audio cables correctly.
Technical details of the turntable itself.
Technical details of the tonearm assembly.
Advice for optimal performance and preventing damage during use.
Lists common issues and their corresponding solutions.
To Next Page
