Accessories
Bib
1 - Make sure the head support is folded down and secured in place with the
lower head support buttons.
2 - Store the extra length of the shoulder buckle adjustment in the pocket on
the shoulder buckle strap.
3 - Cover the front of the head support with the front of the bib and slide both
head support buttons through the button holes on the bib.
4 - Fold and tuck the bib over the top edge of the head support.
5 - Wrap both side edges of the bib around the shoulder buckle strap. The
back edge of the bib is slid between the shoulder strap and shoulder buckle
strap. The front edge of the bib is laid over the shoulder buckle strap.
6 - Attach the sides of the hook and loop. Make sure the bib is laying flat and is
secure to the top edge of baby carrier.
1 4
2
3 6
5
CUDL™ instructions29
CUDL™ instructions
30
To Next Page
Loading...
Need help?
General
