Hood
1 - Make sure the head support is up and secured in place with the upper head
support buttons. Undo the snap on the pocket located on the top edge of
the head support.
2 - Pull the hood out of the hood pocket.
3 - Adjust the hood to the desired position to shade your child.
4 - Attach three snaps on the hood strap to the three snaps on the shoulder
strap. Repeat for the other side.
Make sure the hood is not covering your child's mouth or laying too tightly
over their head.
1 3
2
4
CUDL™ instructions33
CUDL™ instructions
34
To Next Page
Loading...
