Harness Covers
1 - Unbutton the head support and fold it down.
2 - Store the extra length of the shoulder buckle adjustment in the pocket on
the shoulder buckle strap.
3 - Slide the harness cover between the shoulder strap and the shoulder buckle
strap.
4 - Slide the button on the shoulder buckle strap through the button hole on
the harness cover.
5 - Attach the hook and loop. Make sure the bottom edge of the harness cover
is tucked behind the head support.
6 - Repeat on the other side. When both harness covers are secure, attach
both bottom head support buttons into the button holes on the head
support.
1 4
3 6
5
2
CUDL™ instructions31
CUDL™ instructions
32
To Next Page
Loading...
Need help?
General
