Nuna Exec User Manual

Harness Storage
1
- Loosen harness, open chest clip, and open
harness buckle.
Fully raise head support (p.30) (1). Unsnap and
lift the upper and lower seat covers (2).
2 - Gently slide each harness strap under the
harness storage compartment cover (1). DO NOT
FORCE OR BEND the compartment cover.
Store chest clip and buckle tongues inside
harness storage compartment (2).
3 - Slide harness buckle through slot in rear facing
True Tension
™
door.
4 - Store harness buckle in lower anchor storage
compartment. Replace seat cover.
Shoulder Belt Guide Use
When securing child in booster, the vehicle
shoulder belt MUST be routed through the
shoulder belt guide.
5 - Pull the shoulder belt guide back (1) and slip
the vehicle shoulder belt in front of the open
shoulder belt guide (2).
6 - Release the shoulder belt guide.
ALWAYS store the harness when using the
child restraint as a booster.
The vehicle shoulder belt must route
COMPLETELY through the shoulder belt guide
and across the center of the child's chest, and
must not fall off the child’s shoulder.
40 EXEC
™
instructions
1
2
3
4
41EXEC
™
instructions
1
2
2
1
5
6
1
2

Nuna Exec Specifications

General

Recline positions	8 positions
Adjustable headrest	Yes
Orientation	Rear-facing and forward-facing
Safety features	Side-impact protection, energy-absorbing foam
Product Weight	26.6 lbs
Expiration	10 years
Safety Standards	FMVSS 213 certified
Installation method	Belt path, LATCH