Nuna Pipa lite User Manual

14 PIPA lite instructions
Infant Car Seat Parts List
Make sure all parts are available before assembly.
If any part is missing, please contact Nuna (see
page 4 for information). No tools are required
for assembly.
1 Canopy
2 Seat Pad
3 Body Support (x2)
4 Chest Clip
5 Buckle and
Crotch Pad
6 Harness
Adjustment Button
7 Harness
Adjustment Strap
8 Buckle Holder
9 Handle Adjustment
Button
10 Stroller Release
Button*
11 Canopy Release
Button
12 Shoulder Harness
Pads
13 Head Support (x2)
14 Handle
15 Stroller Release
Button**
16 Harness Slots
17 Base Attachment
Bar
18 Harness Straps
19 Shoulder Harness
Loops
20 Splitter Plate
21 Base Attachment
Bar
*only used with infant car seat post adapters
**only used with infant car seat ring adapters

Nuna Pipa lite Specifications

General

Weight Capacity	4 to 32 lbs
Height Capacity	Up to 32 inches
Weight	5.3 lbs
Safety Features	Side impact protection
Compatibility	Nuna strollers
Safety Standards	FMVSS 213
Infant Insert	Included
Canopy	UPF 50+ canopy
Harness Slots	5-point harness