Nuna Pipa lite User Manual

Product Overview
Canopy
1 - To attach the canopy, snap the canopy to the
canopy mount on both sides. To open the
canopy, pull the canopy toward the front of the
seat, and to close the canopy, push it back.
2 - To remove the canopy, reverse step 1. Then
unsnap the seat pad from the shell and lift
fabric up.
3 - Press the canopy release button (1) and pull
canopy through the fabric slot (2).
Repeat on opposite side.
Dream Drape
™
Included on PIPA lite lx models.
4 - Unzip the zipper behind the front canopy bow.
5 - Pull the dream drape
™
out of the compartment.
Attach the dream drape
™
to the magnets on
each corner to the front of the carrier.
Shoulder Harness Pads
6 - Shoulder harness pads are removable.
Unfasten the hook and loop to remove the
shoulder harness pads.
18 PIPA lite instructions

Nuna Pipa lite Specifications

General

Weight Capacity	4 to 32 lbs
Height Capacity	Up to 32 inches
Weight	5.3 lbs
Safety Features	Side impact protection
Compatibility	Nuna strollers
Safety Standards	FMVSS 213
Infant Insert	Included
Canopy	UPF 50+ canopy
Harness Slots	5-point harness