Nuna Pipa lite User Manual

Shoulder Belts
1 - Tighten harness to fit snugly on child’s shoulders.
It is snug if you cannot pinch a fold in the strap.
2 - Harness straps must be at or just below
shoulders.
3 - To adjust shoulder harness height, remove
child and loosen harness by pressing the
harness adjustment button (1) while pulling on
the harness strap (2). The harness adjustment
button is located inside the slot on the seat pad.
4 - Turn child restraint over and remove one
harness loop from metal splitter plate.
5 - Pull loose ends of harness loop out through
slots and place in correct slot.
6 - Repeat process for second shoulder harness
strap and then re-attach harness to splitter
plate.
24 PIPA lite instructions

Nuna Pipa lite Specifications

General

Weight Capacity	4 to 32 lbs
Height Capacity	Up to 32 inches
Weight	5.3 lbs
Safety Features	Side impact protection
Compatibility	Nuna strollers
Safety Standards	FMVSS 213
Infant Insert	Included
Canopy	UPF 50+ canopy
Harness Slots	5-point harness