Handle Adjustment
1 - The carrier handle can be adjusted to 3
positions.
2 - To adjust the handle position, squeeze handle
buttons on both sides.
3 - Rotate handle until it clicks into any of the 3
positions. Handle can be used in vehicle in any
locked position.
Be sure handle is locked in the carry position
before lifting child restraint by handle. An
unlocked handle could move unexpectedly,
causing injury to child.
Handle MUST NOT contact the vehicle interior
(side of car or seat in front) when installed.
1
2
3
21PIPA instructions20 PIPA instructions
To Next Page
Loading...
