Seat Pad
1 - Pull out the fastening pieces underneath the
edge of the seat.
The best way to work this area (as some seat
pads feel more tight in this area than others)
is to pull the fabric towards the front of the seat
at one corner. Once you have one corner out,
you can easily work the other side out.
2 - Remove the harness from the splitter plate.
3 - Remove the seat pad from the stroller release
buttons* as shown.
*Feature used only with infant car seat adapters. Infant car
seat adapters for strollers sold separately.
4 - Grasp the seat pad at the bottom of the
adjuster button as shown and pull the seat
pad out from under one edge of the adjuster
button. Work around the adjuster button to
release the remainder of the seat pad.
1
2
3
4
23PIPA instructions22 PIPA instructions
To Next Page
Loading...
