Shoulder Belts
1 - Tighten harness to fit snugly on child’s
shoulders. It is snug if you cannot pinch a fold
in the strap.
2 - Harness straps must be at or just below
shoulders.
3 - To adjust shoulder harness height, remove
child and loosen harness.
4 - Turn child restraint over and remove one
harness loop from metal splitter plate.
5 - Pull loose ends of harness out through slots
and place in correct slot.
1
2
3
4
5
24 PIPA instructions 25PIPA instructions
To Next Page
Loading...
