50
3 When installing the child restraint in the toddler mode, do not
use the infant insert.
4 Fix the buckles on the both sides of seat to make placing the
baby more convenient.
(20)
5 Place the child into the child restraint and lock the buckle.
Please refer to. (22)
6 Tighten the shoulder harness straps by pulling the adjustment
webbing. (27)
Make sure the space between the child and the Shoulder
Harness Straps is about the thickness of one hand.
Detach Soft Goods
1 Open the buckle, then remove the infant insert.
2 Open the snaps and fabric clips.
(28)
3 Push the crotch strap through the crotch strap opening. (29)
4 Move the shoulder belt behind the head support. (30)(31)
5 Detach the hook and loop fasteners to remove the shoulder
belt cover. (32)
6 Unfasten the elastic on the bottom of headrest to remove the
head support soft goods. (33)
7 Remove the soft goods. (34)
To assemble winter and summer soft goods according to reversed
steps above.
To Next Page
Loading...
