Nuova Simonelli Aurelia II - Programming (Technician Mode)

59
ENGLISH
The display will read:
AUTOMATIC CLEANING CYCLE
7KHGLVSOD\ZLOOUHDG
AUTO.CLEAN.CYCLE
LIST OF PROGRAMMABLE FUNCTIONS
(TECHNICIAN Mode)
Operation to be carried out
EXCLUSIVELY by a Qualified
Technician.
Adjustment by NON qualified techni-
cians can invalidate the guarantee.
7.3 PROGRAMMING
(TECHNICIAN MODE)
To enter the Technician Mode programming
environment:
+ROGGRZQWKH
key for at least 10
seconds and wait for the acoustic signal.
TOTAL
7KHGLVSOD\ZLOOUHDG
TOTAL
7KHORQJFRIIHHNH\ of each group will
flash on and off and when pressed, the
machine will show the number of coffees
delivered with that particular group.
3UHVVWKH
keys to view the
other functions.
3UHVV WKH
key to quit the display
mode.
MACHINE TOTAL
7KHGLVSOD\ZLOOUHDG
MACHINE TOTAL
DELIVE. xxx
3UHVVWKH keys to view the
other functions.
3UHVV WKH
key to quit the display
mode.
WASH COUNT
7KHGLVSOD\ZLOOUHDG
CLEANING COUNTER
7KHORQJFRIIHHNH\IRUHDFKJURXS will
flash and when pressed, the display will
show the number of wash cycles carried out
for that particular group.
3UHVVWKH
keys to view the
other functions.
3UHVV WKH
key to quit the display
mode.
AUTO.CLEAN.CYCLE
followed by:
PROGRAM. DOSES
3UHVV and the display will read:
AUTO.CLEAN.CYCLE
SELECT
7KH FHQWUDO NH\ RI HDFK XQLW 1 long
coffee will begin to flash on and off. Insert
the blind filter (fig. 2 A07) into the filter-hold-
er, add half a dose of Pulicaff and hook the
filter-holder up to the unit for which you
intend to carry out an automatic cleaning
cycle. It is possible to wash more than one
group at the same time.
3UHVVWKH
1 long coffee key to start
the automatic cleaning cycle on the unit.
The display will read:
AUTO.CLEAN.CYCLE
¡ L
where 1L indicates the cleaning cycle has
been activated. Once the cycle of 15 deliv-
eries of 5 seconds each, with a 10-second
pause between each one has been com-
pleted, the
1 long coffee key of the
AUTO.CLEAN.CYCLE
DOSE PROGRAM.
DELIVERY COUNT
ACTIVE UNITS
*
ON-OFF PROGRAM.
ENERGY SAVING
SETPOINT TEMPERATURE (and OFFSET)
*
CUP-WARMER PRO.
DATE/TIME
DISPLAY SETTING (and DELIVERING TIME)
*
DELIVERING IN WASHING MODE
POURING TIME
°
SETPOINT PRESS.
HISTORICAL ALARM
MAINTENANCE
WASH ALARM
LANGUAGE
TEMPERATURE
LIGHT ADJUST
* T3 version only
° Digit version only