What to do if the motor starts but the Nussbaum MCS 5500 ND WIRELESS are not lifting?
If the motor of your Nussbaum lifting columns starts but the lift isn't lifting, the potential solutions are: * Unload the vehicle. * Refill the oil. * Call your service partner.
What to do if the Nussbaum mobile lift does not lowered?
If your Nussbaum mobile lift isn't lowering, you can try single-mode operation. For further assistance, it is recommended to call your service partner or exchange the fuse.
How to troubleshoot if the motors of Nussbaum MCS 5500 ND WIRELESS does not start?
If the motors of your Nussbaum lifting columns don't start, check the following: * The plug. * The main fuse. * The position of the main switch. * Check and exchange the fuse if needed. * Check the feed line. Allow it to cool down for approximately 10 minutes, check the press buttons, and refer to chapter 6.1.
General| Brand | Nussbaum |
|---|---|
| Model | MCS 5500 ND WIRELESS |
| Category | Lifting columns |
| Language | English |
To Next Page