NuTone nc300 User Manual

MODELS NM200 • NC300
Page 4
DISPLAY BRIGHTNESS
1. SimultaneouslypressTUNE UP andPOWER.Thedisplay
cycles through brightness levels: low, medium, and high,
then repeats the cycle.
2. Pressthebuttonsrepeatedlyuntilyoureachthebrightness
you prefer.
INTERCOM SELECTOR SWITCH SETTINGS
You can set all major Intercom functions using the Intercom
selector switches on the Master Station.
Youcanseteachstationtooneoffourcongurations:
• IntercomOnly
• Radio/INT(MusicsourceandIntercom)
• Off
• Monitor
Note:Whenthesystemhasmorethan9RemoteStationssome
intercom selector switches will control two remote stations.
Intercom
WhenastationissettoIntercom(Intercomonly):
• Youcantalkandlistenfromthisstation.
• Theroomdoesnotreceivemusic.
• The room cannot be monitored.
• The room cannot hear other rooms that are set to Monitor.
 Note: When a station is set to Intercom, the sound and
activityinthatroomcanbeheardbyanotherremotestation
bypressingtheLISTENbutton.
• The station hears the door chime and users can talk and
listen to the Door Station.
Radio and Intercom
When a station is set to Radio/INT (Music source and
Intercom):
• Youcantalkandlistenfromthisstation.
• Theroomcanreceivemusic.
• The station can monitor any other station that is set to
Monitor.
 Note:Whenmusicison,theaudiofromamonitoredroomis
heard in addition to the music.
• The station itself cannot be monitored.
 Note: When a station is set to Radio/INT, the sound and
activityinthatroomcanbeheardbyanotherremotestation
bypressingtheLISTENbutton.
• The station hears the door chime and communicate with and
listen to a Door Station.
Off
WhenastationissettoOFF:
• You can communicate from an Indoor Remote Station but
youcannotcommunicatefromanOutdoorRemoteStation.
 Note: When music is off, use VOLUME UP and VOLUME
DOWNtoadjustMasterVolume.
3. Press TONE. The Loudness function appears. Press
VOLUMEUPtoturnLoudnesson.PressVOLUMEDOWN
toturnLoudnessoff.
4. Press TONE. The Treble function appears. Use VOLUME
UPandVOLUMEDOWNtoadjustthetreblefrom0-14.
5. PressTONE.TheBassfunctionappears.UseVOLUMEUP
andVOLUMEDOWNtoadjustthebassfrom0-14.
6. PressTONE.IntercomVolumeappears.UseVOLUMEUP
and VOLUME DOWN to adjust the Intercom Volume from
0-29.
 Note: When music is off, press TONE to access Intercom
Volume,thenuseVOLUMEUPorVOLUMEDOWNtoadjust
IntercomVolume.

NuTone nc300 Specifications

General

Brand	NuTone
Model	nc300
Category	Intercom System
Language	English