To Next PageTo Next Page
Need help?Do you have a question about the NUTOOL NCS185 and is the answer not in the manual?
Explains product safety symbols and their meanings for user understanding.
Explanation of the safety markings on the products.
Explains safety pictograms found on the product.
Emphasizes the importance of reading the handbook carefully before operating the tool.
Warns about the danger of cuts from the blade or sharp parts.
Warns about the danger of flying splinters or debris during operation.
Warning about electrical voltage and the risk of electric shock.
Mandates the use of hearing, sight, and respiratory protection during operation.
Warns against approaching the machine while wearing loose clothing that could get caught.
Warning against touching the moving blade to prevent injury.
Prohibits cleaning, lubricating, or repairing the machine while it is in operation.
States not to clean, lubricate, or repair machine parts that are in motion.
Identifies and lists all parts and controls of the circular saw.
Provides guidance on safe and effective operation, with visual examples.
Explains kickback and how to prevent it, referring to illustration.
Details how to connect the mains plug, including wiring and safety standards.
Provides guidance on how to safely replace the mains plug if necessary.
Welcomes the user and provides contact information for customer care.
Highlights essential safety precautions to reduce risks before operating the tool.
Provides detailed safety guidelines for operation, maintenance, and usage.
Advises keeping children and pets away from the work area and storing tools safely.
Emphasizes selecting the appropriate tool for the job and avoiding misuse.
Provides precautions to avoid electric shock, including body contact with earthed surfaces.
Mandates two-handed operation for safe use and stability.
Alerts users to the health hazards of wood dust and recommends protection.
Explains the causes of kickback and offers detailed prevention methods.
Lists various warnings and precautions for operating the saw safely and correctly.
Specifies prohibited uses, such as cutting firewood or using incorrect blades.
Identifies potential hazards associated with the tool's construction and design, including blade contact and noise.
Explains how to adjust the cutting depth for 90° cuts using the machine's lever.
Details how to set the cutting angle between 0-45° using the locking lever.
Provides a step-by-step guide on how to safely remove and install saw blades.
Lists voltage, motor power, and no-load speed for the tool.
Specifies the maximum cutting depths at 90° and 45° angles.
Details blade size, sound pressure, and sound power levels.
Contact details for the UK producer and service center.
Contact information for the German distributor and service provider.
Contact details for the French distributor.
General
