3938
3 Place the Lid on top of the
Pitcher and press down to
secure it in place. Place the
Lid Cap over the opening,
press down firmly, and twist
until it’s locked in place.
4 Place the Pitcher onto the
unplugged Motor Base. Twist
clockwise. The Pitcher will
click when locked into place.
5 Plug in the Motor Base. The
Control Panel will illuminate
with the blender menu.
Select the program based on
your ingredients to activate
a preset blending cycle, or
select the Low, Medium, or
High-speed cycle.
6 Once blending has stopped,
twist the Pitcher counter-
clockwise to unlock and
remove it from the Motor
Base. You will hear a “click”
when the Pitcher unlocks.
7 You can pour directly from
the Pitcher by unlatching the
Lid above the pour spout.
WARNING! When opening
the Pitcher Lid, be mindful
of escaping hot steam
or the splattering of hot
ingredients.
8 You can also press up with
your thumb on the tab above
the handle to remove the Lid.
To Next Page
Loading...
