5
DISASSEMBLING YOUR NUTRIFASTER® COMMERCIAL JUICER EXTRACTOR
2. UNLATCH AND REMOVE TOP. Release the top latches by pulling them away from the machine.
Make sure to release both latches at the same time to maintain equal tension. Carefully lift the top
straight up. Be sure it does not touch the screen basket. Place the top upside-down on a flat, stable
countertop.
3. STABILIZE THE BASKET. Place your left arm across the top of the basket, and grip the far side of the
basket rim with your fingers. Hold the basket steady by applying equal pressure with your forearm and
hand.
4. UNSCREW AND REMOVE THE BLADE NUT. With your right hand, place the head of the wrench on
the blade nut. Turn the blade nut counter-clockwise while holding the basket steady with your left arm.
To remove the blade nut, use only the special wrench provided with your unit. Always wash the wrench
between uses. NEVER leave the wrench on the blade nut unattended.
5. REMOVE JUICING PARTS. With both hands, carefully lift the basket and cutter plate from the juice
pan. Carefully insert your index finger into the center hole of the cutter plate, and lift it out of the basket.
The cutter plate blades are sharp, so handle carefully. EXTRA CARE MUST BE TAKEN SO THE
BASKET IS NOT DAMAGED WHEN DISASSEMBLING OR REASSEMBLING THE MACHINE.
6. REMOVE THE JUICE PAN. With both hands, lift the juice pan out of the castle and set it upside-down
on a flat, stable countertop.
1. TURN OFF AND UNPLUG JUICER. Make sure the motor and cutter plate have
completely stopped before disassembling. Disconnect the pulp ejection tube and
remove the food pusher.
To Next Page
Loading...
Need help?
General