7
OPERATION OF YOUR NUTRIFASTER COMMERCIAL JUICE EXTRACTOR
1. Ensure the machine is fully assembled.
2. Plug it in.
3. Place the juicing container below the juice pan spout.
4. Make sure there is a receptacle for pulp waste under pulp tube.
5. Turn ON the machine.
6. Insert prepared produce in the feed tube.
7. Use the Food Pusher to guide produce through the feed tube. Do not force. While juicing, make sure
pulp is being ejected through the pulp tube.
8. Turn OFF the machine when not in use. (If the juicer runs continuously for 45 minutes -not typical-
turn the machine OFF and allow 15 minutes for the switches to cool-down.)
9. If not in use for more than 30 minutes, UNPLUG, disassemble and rinse the basket under hot water to
remove any pulp residue.
To Next Page
Loading...
Need help?
General