14
7: Date Setting - Month: The month information of date is displayed. If updating is necessary,
change.
8: Date Setting - Day: The day information of date is displayed. If updating is necessary, change.
9: Time Setting - Hour: The hour information of time is displayed. If updating is necessary,
change.
A: Time Setting - Minute: The minute information of time is displayed. If updating is necessary,
change.
B: Time Setting – Second: The second information of time is displayed. If updating is necessary,
change.
C: Date / Time Update: 0: No change 1: Update date / time according to the entered values. The
entered values are considered as current Date / Time information when 5, 6, 7, 8, 9, A parameters
are changed and B parameter is set to 1.
D: Password: The password used to enter the operator parameters. This password used when
you want to change the set values. No password if 0 is selected.
6.2 PROGRAMMING SUMMARY
You can set the steam sterilizer on stand-by. Follow the below steps to set and save the values.
By pushing the encoder button select SET menu.
See that second LED flashes in the temperature
display, again push the encoder button.
To Next Page
Loading...
