NUVE TK 252 - Setting and Operation Cycles

4.4. Setting and Operation Cycles
4.4.1. Setting the Language, Date and Time
 Switch on the cabinet.

 While there is “NUVE” logo on the screen, push “F1” to set language, date and time.
LANGUAGE
TUR ENG FRA
 Push “TAB” key to select language.
 Change the value by using “INCREASE” and “DECREASE” keys
 Push “ENTER” key to save the choice.
SET DATE – TIME?
08 AUGUST 2008
14:52:00
 Push “TAB” key to select language.
 Change the value by using “INCREASE” and “DECREASE” keys
 Push “ENTER” key to save the choice.
TK
WELCOME
08 AUGUST 2008
14:52:00
After 5 seconds the LCD display goes to stand-by position with a short signal.
10