15
Cooking Instructions
• Release pressure according to recipe, natural
or quick release, until the NuWave PPC
pressure indicator depresses.
• Do not cool NuWave PPC with running water.
Turn off heat source and turn valve to steam
release position to release any remaining
steam. After steam is released and the
pressure indicator has depressed, the lid can
be opened.
• Push the push plate forward to the center of
the lid. See Figure 11.
• Turn lid handle counterclockwise.
See Figure 12.
• Match “O” on lid and body handle, then
lift the lid handle to open. Use caution when
removing lid. See Figure 13.
Notes:
• If the pressure indicator button is raised
and too much steam is escaping;
lower the cooking temperature to
lower the pressure
.
• If the pressure indicator button is lowered,
and not enough steam has built;
raise the temperature to raise the pressure.
Figure 11
Figure 12
Figure 13
Opening Precision Pressure Cooker After Cooking
To Next Page
Loading...
