9
Safety Systems & Structure
7. Lid Handle: Used to remove lid from NuWave PPC, the lid handle contains important
components for vital use.
7a. Push Plate: When lid is properly closed, the push plate lets you move it
backwards to lock. Push the push plate forward to unlock lid.
7b. Pressure Indicator: Pressure indicator rises once pressurized, and returns to
original place when pressure is released.
8. Body Handle: Marks position where lid and pot fit together.
9. Side Handle: This piece allows for easier transportation when moving NuWave PPC.
10. NuWave™ PPC Pot: Contains and holds food as it cooks.
11. Body Base: Comprised of three layers of induction-ready stainless steel, for quick and
even heat distribution.
10
11
98
12. Pressure Regulator Device: This keeps
pressure stable and within normal
operating levels while cooking.
1 = low pressure level (7.3 psi)
2 = high pressure level (13.1 psi)
= quick steam release position
ø = regulator removal position
12a. Valve Pressure Regulator Dial
12b. Large Spring
12c. Small Spring
12d. Valve Shaft Cover
12e. Valve Shaft Core
13. Ventilated Pipe: the device for the
releasing of steam in the NuWave PPC.
14. Pressure Regulator Base
15. Sealing Ring for pressure regulator
7
7a
7b
12
12a
12b
12c
12d
12e
5
15
13
14
Lid
To Next Page
Loading...
