NuWave Brio 7.25Q - Editing Presets During Cooking

instructions
20
INSTRUCTIONS
20
display will show
"End" followed
by "Save," which
indicates that there
has been a change in
the program settings
during cooking.
Note: Once the cooking
process has nished, the
preset is no longer editable.
If you have already saved
the changes to a program
number while cooking,
there is nothing more you
need to do. The edited
program is available for
further recall.
If you saved a preset to
a lled memory slot, the
new preset will override
the previous one. Any
edits to a preset program
(1~100) can only be saved
and stored into program
numbers 101~150. You
cannot save an adjusted
preset program to its
original preset program
number.
• Once all of your edits
are made, press
and hold the MENU
button for 1 second.
The LED display
will show "prog" and
"101."
4. Use the Up and Down
arrows to nd the
program number to
save your edits to.
5. Press the MENU button
again to save and store
the edits.
Edit during cooking
1. While cooking, press
the STAGE button until
the function you would
like to edit shows in the
LED display.
2. Use the Up and Down
arrows to adjust the
cooking temperature
and time.
• If there are more
cooking presets that
you would like to edit,
press the STAGE
button until you reach
the preset you would
like to edit and make
the changes.
• The Brio will continue
the cooking process
with the edits that
you have made.
• When cooking has
nished, the Brio
will beep three (3)
times and the LED