NuWave BRIO PLUS 8QT - Automated Preheat Feature; Using Cooking Notifications; Preset Cooking Programs

10 | nuwavenow.com
Preset
There are 100 named preprogrammed presets and are set to automatically
preheat. These are listed in the Quick Start Guide and Recipe Book. There are 50
user presets.
Using the 100 Presets
1. Press PRESET once, “1” and the preset name will scroll on the display.
2. Use the Up/Down arrows on the left to select the preset number for the recipe
you want to make.
Notification
The notication will inform you when it is time to shake the basket or flip your
food halfway through cooking. The notication will ash when selected or if it is
included in a preset. It must be selected before the cooking cycle begins.
Adding notification to your own recipe or user preset
1. Before beginning your cooking cycle, select the notication.
1. The notication will flash indicating it has been selected and will notify you
when it is time to shake, flip, or turn your food along with 3 triple beeps.
2. The flashing notication will display for approximately 8 seconds.
3. When the cooking cycle is nished, the Brio will beep 3 times and display
“END”.
Note
• If no action is taken when the notication happens, the flashing will
display for approximately 8 seconds.
• A preset that has the notication cannot be deleted.
• Once the cooking cycle has started, notication cannot be added or
deleted.
• When added to a preset or a user preset, will only display the word :FLIP”.
Auto Preheat
The Brio can be set to automatically preheat prior to cooking.
1. Press and hold PREHEAT.
2. The Brio will beep twice, indicating the auto preheat has been turned on.
3. Repeat to disable automatic preheat.
Note
• Auto Preheat will remain enabled even when the Brio is turned off or unplugged.