14 | nuwavenow.com
Cleaning
Clean the Brio after every use or in between batches. The Base Tray and
Air Circulation Riser have a non-stick coating. Do not use metal utensils or
harsh abrasives when cleaning as these can damage the coating.
1. Unplug the appliance and make sure it cools completely.
2. Use a damp cloth to wipe the outside of the appliance.
3. Clean the Base Tray and inside components with a nonabrasive
sponge, hot water, and mild detergent.
4. To clean the display panel spray window cleaner on a clean cloth,
Then wipe display panel.
Note: Remove the Base Tray and place it on a heat-resistant surface to help
cool the appliance faster. If using the dishwasher for the Base Tray, and Air
Circulation Riser use the top rack only.
Tip: If there is residual food on the Base Tray, and Air Ciruclation Riser,
add some hot water and let them soak separately for about 10 minutes.
Then, use a soft cleaning brush to remove any lingering
food.
Storage
1. Unplug the Brio and let it cool down completely.
2. Make sure that all parts are clean and dry.
IMPORTANT - Do not immerse the Brio in water or
attempt to clean the appliance in the dishwasher.
Cleaning Silicone Tabs
The Circulation Riser comes with 4 Silicone Tabs.
1. Let the Circulation Riser cool completely.
2. Grasp the Circulation Riser by the central handle and pull it straight up to
remove it from the Base Tray.
3. Carefully pull the Silicone Tabs up to slide them off the metal tabs, then
pull each of them out.
Note: Wash the Air Circulation Riser and Silicone Tabs with warm, soapy
water and sponge. The Circulation Riser can be washed in a dishwasher, top
rack only. DO NOT wash the Silicone Tabs in the dishwasher.
CLEANING & MAINTENANCE
Replacing the Silicone Tabs
1. Insert the locking mechanism into the tab hole.
2. Slide the Silicone Tab over the metal tab.
3. Pull the locking mechanism until securely locked in place.
To Next Page
Loading...
